Storing the information you need — Variables
After reading the last couple of articles you should now know what JavaScript is, what it can do for you, how you use it alongside other web technologies, and what its main features look like from a high level. In this article, we will get down to the real basics, looking at how to work with the most basic building blocks of JavaScript — Variables.
| Prerequisites: | A basic understanding of HTML and CSS, an understanding of what JavaScript is. |
|---|---|
| Objective: | To gain familiarity with the basics of JavaScript variables. |
Tools you need
Throughout this article, you'll be asked to type in lines of code to test your understanding of the content. If you are using a desktop browser, the best place to type your sample code is your browser's JavaScript console (see What are browser developer tools for more information on how to access this tool).
What is a variable?
A variable is a container for a value, like a number we might use in a sum, or a string that we might use as part of a sentence.
Variable example
Let's look at a simple example:
<
button
id
=
"
button_A"
>
Press me
</
button
>
<
h3
id
=
"
heading_A"
>
</
h3
>
const
buttonA =
document.
querySelector
(
"#button_A"
)
;
const
headingA =
document.
querySelector
(
"#heading_A"
)
;
buttonA.
onclick
=
(
)
=>
{
const
name =
prompt
(
"What is your name?"
)
;
alert
(
`
Hello
${
name}
, nice to see you!
`
)
;
headingA.
textContent =
`
Welcome
${
name}
`
;
}
;
In this example pressing the button runs some code. The first line pops a box up on the screen that asks the reader to enter their name, and then stores the value in a variable. The second line displays a welcome message that includes their name, taken from the variable value and the third line displays that name on the page.
Without a variable
To understand why this is so useful, let's think about how we'd write this example without using a variable. It would end up looking something like this:
<
button
id
=
"
button_B"
>
Press me
</
button
>
<
h3
id
=
"
heading_B"
>
</
h3
>
const
buttonB =
document.
querySelector
(
"#button_B"
)
;
const
headingB =
document.
querySelector
(
"#heading_B"
)
;
buttonB.
onclick
=
(
)
=>
{
alert
(
`
Hello
${
prompt
(
"What is your name?"
)
}
, nice to see you!
`
)
;
headingB.
textContent =
`
Welcome
${
prompt
(
"What is your name?"
)
}
`
;
}
;
You may not fully understand the syntax we are using (yet!), but you should be able to get the idea. If we didn't have variables available, we'd have to ask the reader for their name every time we needed to use it!
Variables just make sense, and as you learn more about JavaScript they will start to become second nature.
One special thing about variables is that they can contain just about anything — not just strings and numbers. Variables can also contain complex data and even entire functions to do amazing things. You'll learn more about this as you go along.
Note: We say variables contain values. This is an important distinction to make. Variables aren't the values themselves; they are containers for values. You can think of them being like little cardboard boxes that you can store things in.
Declaring a variable
To use a variable, you've first got to create it — more accurately, we call this declaring the variable. To do this, we type the keyword let
followed by the name you want to call your variable:
let
myName;
let
myAge;
Here we're creating two variables called myName
and myAge
. Try typing these lines into your web browser's console. After that, try creating a variable (or two) with your own name choices.
Note:
In JavaScript, all code instructions should end with a semicolon (;
) — your code may work correctly for single lines, but probably won't when you are writing multiple lines of code together. Try to get into the habit of including it.
You can test whether these values now exist in the execution environment by typing just the variable's name, e.g.
myName;
myAge;
They currently have no value; they are empty containers. When you enter the variable names, you should get a value of undefined
returned. If they don't exist, you'll get an error message — try typing in
scoobyDoo;
Note: Don't confuse a variable that exists but has no defined value with a variable that doesn't exist at all — they are very different things. In the box analogy you saw above, not existing would mean there's no box (variable) for a value to go in. No value defined would mean that there is a box, but it has no value inside it.
Initializing a variable
Once you've declared a variable, you can initialize it with a value. You do this by typing the variable name, followed by an equals sign (=
), followed by the value you want to give it. For example:
myName =
"Chris"
;
myAge =
37
;
Try going back to the console now and typing in these lines. You should see the value you've assigned to the variable returned in the console to confirm it, in each case. Again, you can return your variable values by typing their name into the console — try these again:
myName;
myAge;
You can declare and initialize a variable at the same time, like this:
let
myDog =
"Rover"
;
This is probably what you'll do most of the time, as it is quicker than doing the two actions on two separate lines.
A note about var
You'll probably also see a different way to declare variables, using the var
keyword:
var
myName;
var
myAge;
Back when JavaScript was first created, this was the only way to declare variables. The design of var
is confusing and error-prone. So let
was created in modern versions of JavaScript, a new keyword for creating variables that works somewhat differently to var
, fixing its issues in the process.
A couple of simple differences are explained below. We won't go into all the differences now, but you'll start to discover them as you learn more about JavaScript (if you really want to read about them now, feel free to check out our let reference page ).
For a start, if you write a multiline JavaScript program that declares and initializes a variable, you can actually declare a variable with var
after you initialize it and it will still work. For example:
myName =
"Chris"
;
function
logName
(
)
{
console.
log
(
myName)
;
}
logName
(
)
;
var
myName;
Note: This won't work when typing individual lines into a JavaScript console, just when running multiple lines of JavaScript in a web document.
This works because of hoisting — read var hoisting for more detail on the subject.
Hoisting no longer works with let
. If we changed var
to let
in the above example, it would fail with an error. This is a good thing — declaring a variable after you initialize it results in confusing, harder to understand code.
Secondly, when you use var
, you can declare the same variable as many times as you like, but with let
you can't. The following would work:
var
myName =
"Chris"
;
var
myName =
"Bob"
;
But the following would throw an error on the second line:
let
myName =
"Chris"
;
let
myName =
"Bob"
;
You'd have to do this instead:
let
myName =
"Chris"
;
myName =
"Bob"
;
Again, this is a sensible language decision. There is no reason to redeclare variables — it just makes things more confusing.
For these reasons and more, we recommend that you use let
in your code, rather than var
. Unless you are explicitly writing support for ancient browsers, there is no longer any reason to use var
as all modern browsers have supported let
since 2015.
Note:
If you are trying this code in your browser's console, prefer to copy &paste each of the code blocks here as a whole. There's a feature in Chrome's console
where variable re-declarations with let
and const
are allowed:
>let myName = "Chris"; let myName = "Bob"; // As one input: SyntaxError: Identifier 'myName' has already been declared >let myName = "Chris"; >let myName = "Bob"; // As two inputs: both succeed
Updating a variable
Once a variable has been initialized with a value, you can change (or update) that value by giving it a different value. Try entering the following lines into your console:
myName =
"Bob"
;
myAge =
40
;
An aside on variable naming rules
You can call a variable pretty much anything you like, but there are limitations. Generally, you should stick to just using Latin characters (0-9, a-z, A-Z) and the underscore character.
- You shouldn't use other characters because they may cause errors or be hard to understand for an international audience.
- Don't use underscores at the start of variable names — this is used in certain JavaScript constructs to mean specific things, so may get confusing.
- Don't use numbers at the start of variables. This isn't allowed and causes an error.
- A safe convention to stick to is lower camel case , where you stick together multiple words, using lower case for the whole first word and then capitalize subsequent words. We've been using this for our variable names in the article so far.
- Make variable names intuitive, so they describe the data they contain. Don't just use single letters/numbers, or big long phrases.
-
Variables are case sensitive — so
myageis a different variable frommyAge. -
One last point: you also need to avoid using JavaScript reserved words as your variable names — by this, we mean the words that make up the actual syntax of JavaScript! So, you can't use words like
var,function,let, andforas variable names. Browsers recognize them as different code items, and so you'll get errors.
Note: You can find a fairly complete list of reserved keywords to avoid at Lexical grammar — keywords .
Good name examples:
age myAge init initialColor finalOutputValue audio1 audio2
Bad name examples:
1 a _12 myage MYAGE var Document skjfndskjfnbdskjfb thisisareallylongvariablenameman
Try creating a few more variables now, with the above guidance in mind.
Variable types
There are a few different types of data we can store in variables. In this section we'll describe these in brief, then in future articles, you'll learn about them in more detail.
Numbers
You can store numbers in variables, either whole numbers like 30 (also called integers) or decimal numbers like 2.456 (also called floats or floating point numbers). You don't need to declare variable types in JavaScript, unlike some other programming languages. When you give a variable a number value, you don't include quotes:
let
myAge =
17
;
Strings
Strings are pieces of text. When you give a variable a string value, you need to wrap it in single or double quote marks; otherwise, JavaScript tries to interpret it as another variable name.
let
dolphinGoodbye =
"So long and thanks for all the fish"
;
Booleans
Booleans are true/false values — they can have two values, true
or false
. These are generally used to test a condition, after which code is run as appropriate. So for example, a simple case would be:
let
iAmAlive =
true
;
Whereas in reality it would be used more like this:
let
test =
6
<
3
;
This is using the "less than" operator (<
) to test whether 6 is less than 3. As you might expect, it returns false
, because 6 is not less than 3! You will learn a lot more about such operators later on in the course.
Arrays
An array is a single object that contains multiple values enclosed in square brackets and separated by commas. Try entering the following lines into your console:
let
myNameArray =
[
"Chris"
,
"Bob"
,
"Jim"
]
;
let
myNumberArray =
[
10
,
15
,
40
]
;
Once these arrays are defined, you can access each value by their location within the array. Try these lines:
myNameArray[
0
]
;
// should return 'Chris'
myNumberArray[
2
]
;
// should return 40
The square brackets specify an index value corresponding to the position of the value you want returned. You might have noticed that arrays in JavaScript are zero-indexed: the first element is at index 0.
To learn more, see our article on Arrays .
Objects
In programming, an object is a structure of code that models a real-life object. You can have a simple object that represents a box and contains information about its width, length, and height, or you could have an object that represents a person, and contains data about their name, height, weight, what language they speak, how to say hello to them, and more.
Try entering the following line into your console:
let
dog =
{
name
:
"Spot"
,
breed
:
"Dalmatian"
}
;
To retrieve the information stored in the object, you can use the following syntax:
dog.
name;
For more on this topic, see the Introducing JavaScript objects module.
Dynamic typing
JavaScript is a "dynamically typed language", which means that, unlike some other languages, you don't need to specify what data type a variable will contain (numbers, strings, arrays, etc.).
For example, if you declare a variable and give it a value enclosed in quotes, the browser treats the variable as a string:
let
myString =
"Hello"
;
Even if the value enclosed in quotes is just digits, it is still a string — not a number — so be careful:
let
myNumber =
"500"
;
// oops, this is still a string
typeof
myNumber;
myNumber =
500
;
// much better — now this is a number
typeof
myNumber;
Try entering the four lines above into your console one by one, and see what the results are. You'll notice that we are using a special operator called
typeof
— this returns the data type of the variable you type after it. The first time it is called, it should return string
, as at that point the myNumber
variable contains a string, '500'
. Have a look and see what it returns the second time you call it.
Constants in JavaScript
As well as variables, you can declare constants. These are like variables, except that:
- you must initialize them when you declare them
- you can't assign them a new value after you've initialized them.
For example, using let
you can declare a variable without initializing it:
let
count;
If you try to do this using const
you will see an error:
const
count;
Similarly, with let
you can initialize a variable, and then assign it a new value (this is also called reassigning
the variable):
let
count =
1
;
count =
2
;
If you try to do this using const
you will see an error:
const
count =
1
;
count =
2
;
Note that although a constant in JavaScript must always name the same value, you can change the content of the value that it names. This isn't a useful distinction for simple types like numbers or booleans, but consider an object:
const
bird =
{
species
:
"Kestrel"
}
;
console.
log
(
bird.
species)
;
// "Kestrel"
You can update, add, or remove properties of an object declared using const
, because even though the content of the object has changed, the constant is still pointing to the same object:
bird.
species =
"Striated Caracara"
;
console.
log
(
bird.
species)
;
// "Striated Caracara"
When to use const and when to use let
If you can't do as much with const
as you can with let
, why would you prefer to use it rather than let
? In fact const
is very useful. If you use const
to name a value, it tells anyone looking at your code that this name will never be assigned to a different value. Any time they see this name, they will know what it refers to.
In this course, we adopt the following principle about when to use let
and when to use const
:
Use const
when you can, and use let
when you have to.
This means that if you can initialize a variable when you declare it, and don't need to reassign it later, make it a constant.
Test your skills!
You've reached the end of this article, but can you remember the most important information? You can find some further tests to verify that you've retained this information before you move on — see Test your skills: variables .
Summary
By now you should know a reasonable amount about JavaScript variables and how to create them. In the next article, we'll focus on numbers in more detail, looking at how to do basic math in JavaScript.